0086-020-39005284
English
| SIZE: | |
|---|---|
| Quantity: | |
267H
YRBEST
Grafted adhesive 267H exhibits outstanding initial adhesion, a prolonged tackiness period, superior heat resistance, and ease of application. It is suitable for use in the manufacturing of basketballs, footballs, and other similar products.
II. PRODUCT SPECIFICATION
Product Number | 267H |
Appearance | Yellow viscous liquid |
Viscosity (CPS/25℃) | 6500±100 |
Drying Time (55±5℃，Min) | 3~5Min |
Shelf life（5~35℃） | 6 months |
III. GUIDELINES FOR USE
1. Grafted adhesive 267H can be used directly.
2. Clean the material surface, treat if necessary, and apply adhesive after drying.
3. Drying time: Dry in a 55-65℃ oven for 3-5 minutes, then press together.
IV. OPERATION PROCESS
1. Ensure the material surface is clean, free from grease, dust, or other impurities.
2. Suitable for bonding PU leather to rubber, EVA to rubber. This product is primarily used in industries such as soccer, basketball, and shoemaking.
3. Apply evenly, heat, and then press for bonding.
V. NOTICE
1. Please test before using any product on a large scale.
2. This product is a chemical product. Please keep it away from children, fire, and water.
3. Store it in a dry and cool place (5~35℃).
4. For more information, please read Material Safety Data Sheet.
Grafted adhesive 267H exhibits outstanding initial adhesion, a prolonged tackiness period, superior heat resistance, and ease of application. It is suitable for use in the manufacturing of basketballs, footballs, and other similar products.
II. PRODUCT SPECIFICATION
Product Number | 267H |
Appearance | Yellow viscous liquid |
Viscosity (CPS/25℃) | 6500±100 |
Drying Time (55±5℃，Min) | 3~5Min |
Shelf life（5~35℃） | 6 months |
III. GUIDELINES FOR USE
1. Grafted adhesive 267H can be used directly.
2. Clean the material surface, treat if necessary, and apply adhesive after drying.
3. Drying time: Dry in a 55-65℃ oven for 3-5 minutes, then press together.
IV. OPERATION PROCESS
1. Ensure the material surface is clean, free from grease, dust, or other impurities.
2. Suitable for bonding PU leather to rubber, EVA to rubber. This product is primarily used in industries such as soccer, basketball, and shoemaking.
3. Apply evenly, heat, and then press for bonding.
V. NOTICE
1. Please test before using any product on a large scale.
2. This product is a chemical product. Please keep it away from children, fire, and water.
3. Store it in a dry and cool place (5~35℃).
4. For more information, please read Material Safety Data Sheet.
