Availability: | |
---|---|
Quantity: | |
713
YRBEST
PRODUCT SPECIFICATION
Product No. | 713 |
Appearance | Transparent viscous liquid |
Viscosity (CPS/25℃) | 2000±200 |
Shelf time(5~35℃) | 6 months |
GUIDELINES FOR USE
Before use, please add 5% of hardener (R950) and mix thoroughly.
Depending on the condition of the PVC surface, clean it as necessary. Apply the adhesive evenly to the material's surface with a brush. Ensure that the adhesive is applied uniformly and not missing or accumulating.
Drying time: Allow the adhesive to dry at room temperature for positioning, then use a heat gun for activation. Activate and press together simultaneously. If possible, dry in an oven at 55-65°C for 3-5 minutes for better results.
PRODUCT SPECIFICATION
Product No. | 713 |
Appearance | Transparent viscous liquid |
Viscosity (CPS/25℃) | 2000±200 |
Shelf time(5~35℃) | 6 months |
GUIDELINES FOR USE
Before use, please add 5% of hardener (R950) and mix thoroughly.
Depending on the condition of the PVC surface, clean it as necessary. Apply the adhesive evenly to the material's surface with a brush. Ensure that the adhesive is applied uniformly and not missing or accumulating.
Drying time: Allow the adhesive to dry at room temperature for positioning, then use a heat gun for activation. Activate and press together simultaneously. If possible, dry in an oven at 55-65°C for 3-5 minutes for better results.