Availability: | |
---|---|
Quantity: | |
N902
YRBEST
Technical Specifications:
Product No. | N902 | N902W |
Appearance | Yellow viscous liquid | Yellow viscous liquid |
Drying condition (55±5℃) | 3~5 Min | 3-5 Min |
Shelf time(5~35℃) | 6 months | 6 months |
GUIDELINES FOR USE
Before use, please add 5% of hardener (R950) and mix thoroughly.
Depending on the condition of the PVC surface, clean it as necessary. Apply the adhesive evenly to the material's surface with a brush. Ensure that the adhesive is applied uniformly and not missing or accumulating.
Drying time: Allow the adhesive to dry at room temperature for positioning, then use a hairdryer with hot air for activation. Activate and press together simultaneously. If conditions permit, dry in an oven at 55-65°C for 3-5 minutes before bonding for better results.
Technical Specifications:
Product No. | N902 | N902W |
Appearance | Yellow viscous liquid | Yellow viscous liquid |
Drying condition (55±5℃) | 3~5 Min | 3-5 Min |
Shelf time(5~35℃) | 6 months | 6 months |
GUIDELINES FOR USE
Before use, please add 5% of hardener (R950) and mix thoroughly.
Depending on the condition of the PVC surface, clean it as necessary. Apply the adhesive evenly to the material's surface with a brush. Ensure that the adhesive is applied uniformly and not missing or accumulating.
Drying time: Allow the adhesive to dry at room temperature for positioning, then use a hairdryer with hot air for activation. Activate and press together simultaneously. If conditions permit, dry in an oven at 55-65°C for 3-5 minutes before bonding for better results.