Product Overview
Industrial footwear manufacturing requires reliable structural bonding between shoe uppers and outsoles. Selecting the correct footwear adhesive depends heavily on substrate chemistry, surface preparation methods, assembly line parameters, and required bonding performance.
For footwear brands, OEM manufacturers, and industrial distributors, choosing a suitable adhesive system involves evaluating substrate compatibility, application techniques, drying and heat-activation profiles, and long-term durability standards.
-
![Instant Shoe Glue]()
Instant Shoe GlueSolvent-based Adhesive 828F
In the traditional footwear manufacturing industry, the use of benzene-based additives has long been difficult to avoid. But today, with growing awareness of... -
![Water Based Laminate Glue]()
Water Based Laminate GlueWater-based Adhesive 610
Our water based laminate glue 610 was developed with a clear goal: being eco-friendly and non-VOC. It's specifically formulated to handle the most demanding shoemaking... -
![Solvent Based Polyurethane Adhesive]()
Solvent Based Polyurethane AdhesiveSolvent-based Adhesive 513
In the footwear industry, finding the right balance between good looks and durability makes the choice of adhesive critical. We developed solvent based... -
![Footwear Adhesives]()
Footwear AdhesivesSolvent-based Adhesive 530W
In the production of athletic shoes and high-end footwear, bonding porous materials is a critical process. Footwear adhesive 530W is a high-performance... -
![Strong Industrial Glue]()
Strong Industrial GlueGrafted Adhesive 285FH
Strong industrial glue 285FH is a toluene-free, environmentally friendly adhesive we developed specifically for the footwear industry, with excellent brushing... -
![High Viscosity Glue]()
High Viscosity GlueGrafted Adhesive 477
More often than not, choose the right adhesive, and the product will last—especially in complex production environments. High viscosity glue 477 is a professional-grade... -
![CR Adhesive]()
CR AdhesiveCR Adhesive 291F
CR adhesive 291F is a totally toluene-free adhesive. Its initial tack is super strong—once you brush it on and stick, it's solidly in place. The open time is generous too,... -
![Industrial Adhesive Products]()
Industrial Adhesive ProductsSingle CR Adhesive 299
With lean manufacturing being adopted widely today, new challenges have emerged for industrial adhesives. Whether it's chloroprene or PU adhesives, existing processes... -
![Insole Glue]()
Insole GlueSingle CR Adhesive 299F
Nowadays, shoe factories have higher and higher demands for precision and efficiency, so adhesive technology has to keep up—otherwise, it can't match the increasingly... -
![Contact Adhesive Solvent]()
Contact Adhesive SolventSolvent-based Adhesive C289
In actual production, there are not only many different materials, but also a dizzying variety of adhesives to match them. I bet you've thought: if only there were... -
![Gasoline Glue]()
Gasoline GlueGasoline Adhesive N101
If you're facing this problem right now—thin, light-colored materials that either won't bond firmly or leave marks—then you need to take a look at our gasoline glue... -
![Environmentally Friendly Adhesive]()
Environmentally Friendly AdhesiveWater-based CR Adhesive 693
Right now, industries across the board are shifting toward green chemistry. In the shoe adhesive sector, that means paying extra attention to achieving...
Product Types & Technical Specifications
Footwear adhesives vary by chemical formulation and intended application. Actual technical parameters must be verified against the official Technical Data Sheet (TDS) for each specific grade.
Key Adhesive Categories
Polyurethane (PU) Adhesive: High initial grab and superior bond strength for athletic and casual footwear.
Grafted Polychloroprene (CR) Adhesive: Fast-curing contact adhesive for general lasting and bottom-cementing.
Water-Based Adhesive: Eco-friendly formulation designed for lower VOC emissions in modern assembly lines.
Specialty Grades: Includes vulcanized, pouring, conductive, sprayable, and waterproof formulations.
Technical Parameter Reference
|
Technical Parameter |
Test Method / Condition |
Typical Value Range |
|
Base Polymer |
ISO 1625 / FTIR |
Polyurethane / Polychloroprene / Water-based |
|
Solid Content (%) |
ISO 3251 (105°C, 2h) |
15% - 45% (Grade dependent) |
|
Viscosity (mPa.s) |
Brookfield (25°C) |
3,000 - 8,000 (Customizable for brush/spray) |
|
Peel Strength (N/mm) |
ISO 11339 (Canvas/Rubber, 24h) |
≥ 4.5 (or substrate tear) |
|
Heat Resistance (°C) |
ASTM D4498 (0.3 MPa load) |
≥ 75°C - 90°C |
|
Specific Gravity |
ISO 2811 |
0.85 - 1.10 g/cm³ |
Compatible Substrates & Grade Selection
Adhesive performance relies entirely on proper matching between upper materials, outsole compounds, and the chemical formulation.
Substrate Combinations to Verify
Upper Materials: Full-grain leather, split leather, synthetic PU leather, polyester mesh, canvas, and neoprene.
Outsole Materials: Thermoplastic Rubber (TPR), Thermoplastic Polyurethane (TPU), Ethylene-Vinyl Acetate (EVA), vulcanized rubber, and painted/primed PU soles.
Selection Checklist for Buyers
Substrate Compatibility: Ensure the adhesive has been lab-tested for your specific upper and outsole compound.
Application Equipment: Confirm whether manual brushing, roller coating, or automated spray application is required.
Performance Standards: Verify target peel strength, dynamic flex fatigue resistance, and aging performance.
Application & Handling Guidelines
Proper shop-floor handling is critical to preventing delamination and ensuring structural integrity.
Surface Preparation
Buff rubber and TPR outsoles to remove release agents; apply appropriate halogenation primer for TR/TPU surfaces; clean leather uppers to eliminate dust and grease.
Application Method
Apply evenly via brush, roller coater, or pneumatic spray gun according to the viscosity specification.
Mixing Requirements (Two-Component)
For systems requiring a crosslinker/hardener, mix at the manufacturer's specified ratio (3% - 5% by weight) and consume within the pot life (4 - 6 hours).
Drying & Activation
Allow room-temperature drying for 20 - 30 minutes, followed by heat activation in a tunnel oven (65°C - 80°C surface temperature) for 3 - 5 seconds.
Pressing
Execute pneumatic outsole pressing at 0.4 - 0.6 MPa pressure for 6 - 10 seconds.
Storage & Safety
Store in a well-ventilated area (5°C - 30°C) away from ignition sources. Consult the Safety Data Sheet (SDS) for solvent-handling precautions.
Manufacturing & Quality Control
Production Capabilities: Automated reactor synthesis, high-shear dispersion, vacuum defoaming, and closed-loop filling lines.
In-House Testing: Strict batch testing covering viscosity, solid content, open time, and destructive peel adhesion.
Traceability: Laser-etched batch numbers on packaging link directly to raw material test certificates and production logs.
Compliance Documentation: Technical Data Sheets (TDS), Safety Data Sheets (SDS), Certificates of Analysis (COA), and Restricted Substance List (RSL) test reports are available to support brand compliance audits.
Frequently Asked Questions
Request a Quote
To receive an accurate technical recommendation, quotation, or trial samples, please provide your project details.
Footwear Application / Type: (e.g., Athletic shoes, casual footwear, safety boots)
Substrates to Bond: (Upper material + Outsole material)
Application Method: (Brush, roller coating, automated spray line)
Estimated Order Volume / Trial Quantity: (Kilograms or drums per month)
Guangdong Yrbest High Polymer Technology Co., Ltd. is one of the most professional footwear adhesive manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy bulk advanced footwear adhesive from our factory. Contact us for quotation and free sample.
